News
Inspection and Dispatch Control for Agricultural Machinery Chains at Hengxin Transmission
2026-11-17
Agricultural machinery chains must withstand heavy loads, dust, moisture, shock, and long operating seasons. Hengxin Transmission Co., Ltd. therefore maintains a strict inspection and dispatch process to ensure that every chain delivered to agricultural equipment manufacturers and distributors meets the required performance level.
Scope and Application
The inspection and dispatch process applies to standard and custom agricultural chains, including drive chains, conveyor chains, feeder chains, and elevator chains used on harvesters, planters, balers, tillage machines, and grain handling equipment.
Incoming Material Inspection
All steel strip, wire, and bar stock for link plates, pins, bushings, and rollers are received with supplier certificates. Incoming inspectors verify:
- Chemical composition against specified steel grades
- Dimensional tolerances and cross-sectional uniformity
- Surface condition, including cracks, seams, rust, or lamination
- Initial hardness and decarburization depth
Material that fails any check is quarantined and rejected. Approved material is marked with a heat number and released for production.
In-Process Inspection
During blanking and punching, link plates undergo first-piece approval and random sampling. Inspectors measure hole diameter, pitch, edge distance, flatness, and burr condition. After heat treatment, components are checked for hardness, case depth, and microstructure to confirm wear resistance and core toughness. Pins, bushings, and rollers are also inspected for roundness, outer diameter, and surface finish after precision machining or grinding.
Assembly and Preloading
Assembled chains are checked for pin insertion, rivet head dimensions, link plate alignment, and free articulation. Chains are then preloaded at a controlled force on dedicated benches. This step seats bearing surfaces, detects weak assemblies, and reduces initial elongation during early field operation.
Final Inspection and Testing
Each chain is visually inspected for cracks, burrs, corrosion, and coating defects. Dimensional checks include total length, pitch accuracy, inner width, and pin protrusion. Batch sampling tests include:
- Ultimate tensile load
- Fatigue performance under cyclic loading
- Wear resistance on test rigs
- Initial elongation after preloading
- Corrosion resistance for coated or plated chains
All results are recorded against the production batch and test equipment.
Packaging and Labeling
Approved chains are cleaned and protected with anti-rust oil or equivalent preservative. They are wrapped with moisture-resistant material and packed according to customer requirements. Labels include product code, pitch, number of links, batch number, inspection status, and quantity. Long-distance or export shipments may use vacuum packaging, wooden cases, or pallets with desiccant.
Dispatch Verification
Before release, the quality and warehouse teams confirm:
- Customer order, drawing version, and specifications
- Quantity and packaging integrity
- Inspection records and certificates of conformance
- Batch traceability and marking
- Loading conditions and transport protection
A pre-shipment checklist is completed, and dispatch documents are archived for future traceability.
Traceability and Quality Records
Each chain batch is linked to material heat numbers, production dates, process parameters, inspection results, and the responsible operators. If a nonconformity is found, the batch is held and reviewed. Corrective actions are recorded and verified. This closed-loop control enables Hengxin Transmission Co., Ltd. to provide consistent quality and reliable delivery for demanding agricultural applications.